Unlocking and restoring your device to OxygenOS/ColorOS can be achieved using the EDL DownloadTool, a Man-In-The-Middle (MITM) attack, and OTP Bypass. Setting up your crack environment and flashing your device are both covered in detail in this article. Please be aware that this method includes some technical skills with operating systems based on Unix and networking.
Requirements:
Internet access in your local network.
Linux VM or Mac on the same network.
Windows PC (if you don't use Windows, you can install it on an external SSD).
Basic understanding of networking (local IP addresses) and familiarity with Unix OSes (Linux or macOS).
Disclaimer: This guide involves an MITM attack, which may have legal and ethical implications. Ensure you have the necessary permissions and are using this guide responsibly.
Download Link
Setting Up Your Crack Environment:
Install MitmProxy on your Linux/Mac from https://mitmproxy.org/.
Install Proxifier on your Windows PC from https://www.proxifier.com/.
Find your Linux/Mac local IP address (usually starts with 192.168).
Proxifier setup on Windows PC:
Click "Add..." and locate the DownloadTool.exe file in the "Applications" section. Set the action to "Proxy HTTPS 192.168..." and click OK.
Install the MITM attack certificates:
Start the proxy on your Linux/Mac using the mitmweb command.
On your Windows PC, visit https://mitm.it/ and follow the instructions to install the MITM certificate.
Return to Proxifier on Windows:
Open Proxifier and click "Profile - > Intermediary servers." Utilize your Macintosh/VM neighborhood IP, port 8080, and select HTTPS convention. Click alright.
Click "Profile - > Proxification rules." Set the "Default" rule to activity "Intermediary HTTPS 192.168..." to divert all organization traffic to the intermediary.
Click "Profile - > Proxification rules." Set the "Default" rule to activity "Intermediary." Presently, you will just divert traffic from DownloadTool to the intermediary.
Blazing Your Gadget:
Open your Linux/Macintosh terminal and explore to the registry containing Oppo_EDL_Crack_v2.py. Execute mitmdump - s Oppo_EDL_Crack_V2.py.
Send off DownloadTool.exe, enter anything in ID/PASS/OTP and click login. You ought to see demands showing up in your Linux/Macintosh terminal. In the event that this doesn't occur or login falls flat, actually look at your intermediary settings.
Select your EDL bundle envelope, click "glimmer," and afterward click "quit blazing." Empower "Default NV" and snap "Begin blazing."
Plug your gadget into EDL mode, and it will begin the blazing system.
When blazing is finished, turn off your gadget. It will boot up naturally.
This technique has been effectively tried on an Indian OnePlus 11 (CPH2447) for different firmware bundles, including CPH2447_A07 and CPH2449_GPDR_A09. OTA refreshes, like CPH2449_GPDR A09 to A10, were performed without issues, keeping away from boot circles. Auto splendor works appropriately, and the gadget stays responsive and quick.
While utilizing this strategy, if it's not too much trouble, use mindfulness and obligation, and ensure you have the consents and lawful power to execute these procedure on your gadget.
Comments
Post a Comment